LGB MTS and NMRA DCC Compatible Wireless G Scale Train Controller and Programmer. PIKO 35010 DCC/MTS Digital Central Station 5 Amps.
PIKO 35021 Wireless Navigator Remote for DCC, MTS or DC. PIKO 35022 Wireless Receiver for DCC, MTS or DC. Shourt Line 5112406 SL 6.5 Amp 24V Power Supply (adjustable). AC and DC power cords.
Complete DCC and MTS Train Control System. New in PIKO factory sealed boxes (loco, track and track power clips not included).Fantastic value DCC starter system with all the features of the Massoth wireless MTS/DCC system at 1/3 the price. All PIKO central station and Navigator features including. All PIKO Items Made in GERMANY. 2 year guarantee by PIKO America.
Run any G Scale Loco with OR without a decoder. PIKO components offer the full Massoth Feature Set. PIKO components are weather resistant for Indoor and Outdoor operation. Full LGB MTS and NMRA DCC compatibility.
Easy programming of all your MTS and DCC decoders. Free Shourt Line DCC tutorial for setup, operation and programming. Operating set as shown above (track, track power clips and loco not included). Up to 5 Amps track current.Run any G Scale Loco with OR without a decoder installed. Selectable parallel or serial data processing (may be defined individually for each locomotive). Thermal overload control / automatic overheat protection. Programming track power for all MTS or DCC decoders and switch decoders.
1 connectors for peripheral DiMAX bus. Operational control by PIKO Navigator (included with set) or Massoth DiMAX Navigator or LGB MTS components Loco Remote, Universal Remote, etc.
When used with Massoth bus adapter. MTS and Massoth MTS track protocol and 100% compatible to NMRA DCC Standard. Special plastic coverer on front and rear for water resistance. For Indoor and Outdoor use. The following items are included with this set.
PIKO DiMAX Navigator Now you can enjoy the never ending liberty of controlling your model railroad utilizing the PIKO DiMAX bus compatible Navigator. This wireless hand held control offers a variety of enhanced features no other remote control offers. You control your locomotive and send a switch command at the same time.
No limits The DiMAX navigator is available with wireless RC. The wireless system is working bidirectional on FM and it is fail-safe.You may roam freely in or around your layout. You may recharge your batteries by using the bus cable. The range is up to 1000 feet outdoors. Illumination The DiMAX navigator is one of the few hand held controllers on the market that feature a back lighted display and back lighted emergency stop buttons. The dial type throttle is illuminated too in various colors depending on the operation.
In addition the stop keys are illuminated if triggered. Ergonomic design The housing is ergonomically designed with the weight being perfectly balanced. The symmetric design serves both left and right hand control. High resolution graphic display The large crystal display with its white back light shows the exact operating situation of your locomotives as well as your layout. More than 100 locomotive pictures are stored.
Every locomotive is displayed with a real picture on the crystal screen and you may name your locomotives individually. This enables you to distinguish between locomotives of the same type. The display also shows the state of the 16 functions of your locomotive, light symbol, the driving direction and the speed as a numeric value and as a progressive bar List of properties.Operates on only 3 AAA batteries for days (rechargeable or alkaline). 14, 28, and 128 speed steps. Functions F1 to F16 + light function (as key).
Locomotive pictures of all commonly used models in G-Scale (all LGB models integrated). Parallel and serial data processing. Two operation modes at the same time: 2x locomotive driving mode or 1x locomotive driving mode + 1x switch control mode or switch routes... Easy to use control menu. 16 x 4-fold consist operation.16 switch routes with 15 switches each. 32 automatic functions for driving and switching.
Blocking function mode with limited functions, e. Programming The DiMAX Navigator supports all common programming procedures. The programming procedures depends on the DCC system used. CV programming (direct and indirect) now with MZS III too - CV reading - register programming - POM Program on Main (program on the main driving track) - Locomotive address programming (direct input of the desired address).Language selection The Navigator can to either German or English. The PIKO DiMAX bus compatible Navigator includes. DiMAX Wireless Navigator for US. 20' bus cord for connecting to throttles, accessories and/or receivers.
Factory box to hold all items. The PIKO DiMAX compatible Receiver enables you to wirelessly operate the PIKO Navigator with a PIKO central station or Massoth or LGB MTS III central station without wires at up to 1000 feet.
The PIKO Receiver facilitates the operation of a maximum of 8 PIKO Navigators or Massoth Navigators at the same time. Charging power is provided by the digital bus. A range of up to 1000 ft facilitates a safe operation at all times. 4 frequencies are available to ensure an operation without interferences by other devices. An activity LED reports the current operating status of the receiver at all times.The PIKO Multi Receiver is equipped with the latest state-of-the-art technology is sealed for Indoor and Outdoor operation. DiMAX Wireless Receiver for US.
Factory box to hold all items (shown below). Shourt Line 5112406 SL 6.5 Amp 24V Power Supply (adjustable - comes set to 20Volts).
Easy to use full feature regulated power supply with regulated pure DC power a superior power source (PIKO America now recommends using 20Volts DC for the system). Silent Operation - No Fan required. VAC input range selected by switch. 100% full load burn-in test.EMI/RFI: FCC Part 15J, Class A & CISPR 22 Class A. Shourt Line AC and DC power cords.
Grounded 6 foot AC cord. DC 6 foot power cord for connecting the power supply to the central station. How to hookup the NEW SL-PIKO-DDC-5-PS-Kit - Complete MTS/DCC system for wired or wireless control. The SL-PS150-1-24 if a perfect fit to power the new PIKO MTS/DCC 5 amp central station and PIKO 5 amp boosters. Gain complete MTS II, III (Serial and Parallel) as well as NRMR DCC control and programming with the new PIKO central station, PIKO Wireless Navigator and optional PIKO Wireless Receiver shown below - available at our store.
1 Connect the Power supply + and - terminals outputs to your central station's input terminals. 2 Connect track (Piko quick connect power track clips not included) to the central station outputs.
3 Plug your choice of Massoth DiMAX Navigator or PIKO Navigator into the central station or use the New PIKO wireless Receiver shown below for wireless control and decoder programming. Complete wireless DCC Set: SL-PIKO-DDC-5-PS-Kit includes the following items; PIKO DCC Digital Controller 5 Amps, PIKO Wireless Receiver (Transceiver) with cables, PIKO Navigator bi-directional wireless throttle with cables, SL-PS150-1-24 G Scale Regulated Power Supply with DC and AC power cables (PIKO quick connect track clips, track and loco shown above are NOT included with the set).4 Connect AC power and run your trains. Thanks for looking - Shourt Line by Soft Works Ltd. The item "LGB PIKO G Scale 5Amp MTS DCC Wireless Starter Set NEW" is in sale since Thursday, May 29, 2014.
This item is in the category "Toys & Hobbies\Model Railroads & Trains\G Scale\Starter Sets & Packs". The seller is "watercolorjames" and is located in CA. This item can be shipped worldwide.