DIGITRAX EVOXD WIRELESS RADIO EVOLUTION EXPRESS ADVANCED DUPLEX 5/8A STARTER SET DCS210+, UR93, DT602 & POWER SUPPLY. Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts.
It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Take it to the Max with Evolution Express!
DCS210+ Command Station/Booster With Intelligent AutoReverse. UR93 Duplex Radio Transceiver Panel. PS14 Power Supply (For UR93). The DT602D Advanced Super Throttle & DCS210+ Advanced Command Station Offers.Works with compatible LocoNet systems. Color 2.4 LCD Display Screen. Advanced menu system and displays. Built-in scrolling help and prompting.
Soft ON/OFF switch, with zero OFF power-drain. Advanced display Power Saving for longer wireless battery operation. No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells! Can use recharged AA batteries.
Throttle works tethered or Radio Duplex. Duplex Scan for available Networks and radio signal strength. All throttles come with a LocoNet cord that can be unplugged, and is replaceable.
Dual throttle controls let you control two locos simultaneously. Full numeric keypad makes loco selection simple.
Control light and sound effects functions with the press of a button. Convenient step-by-step throttle option set up.
Simplified 2 or 4 digit addressing setup. Over 9,000 locomotive decoder addresses. Supports turnout and stationary decoder control. Over 2000 turnout decoder addresses. Big System Capacity for Big Layouts.
Run up to 100 addresses at the same time on your system. Run up to 100 throttles at the same time on your system.Address 00 for operation of one loco or MU consist without decoders. Two Digit Addressing is easy to use. Four Digit Addressing lets you use the road number of your engines as their addresses.
5 or 8 Amps of Power to Run More Trains. Selectable Scale Voltage for Safe Operation in ALL Scales. 5 amps of power with included PS615 power supply. Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Headlights can be directional or independently controlled (depending on decoder capabilities).Two DCC Outputs are Better than One! Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders! Use one output for a braking section while the other runs the layout. Built in read/write programmer lets you program and read back CV values. Supports Paged programming (Digitrax preferred method).
Also supports direct, register and ops mode programming. Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos. Advanced consisting and Basic consisting, too!Nested consisting where consists can be consisted together. Stationary Decoders, Turnout Control & Turnout Position Reporting.
Access to stationary decoder control for turnouts and other devices. DT602 reports turnout position based on last command sent. Control 2000+ stationary decoder addresses. Turnout List/Route capability to simplify complex yard operations. EZ routes button for simplified Command Station route programming.
Turn audible warnings on or off. Loco Reset button for easy system purging. Makes LocoNet hook up simple! 2 LocoNet jacks for hooking up your LocoNet network. 3 throttle jacks for hooking up throttles and other non-RailSync devices.
Evolution is just the beginning for large, complex layouts that emphasize prototypical operations. With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more. DCS210+ comes with 3 LocoNet ports for Easy expandability adn a USB interface. IPL updatable firmware for continued product improvements.
Device Query and Device Statistics to help with troubleshooting. Input Mode to help set up detection on your layout. Digitrax gives a one year. On all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.